![]() Now just enable External Camera in 2N® Mobile Video app and save settings: Go to the section Devices, choose your intercom and then click 2N ® Mobile Video: Once you have configured the external camera in the intercom, you need to allow the use of the external camera within your MY2N account. If you've configured everything correctly y ou should be able to see the camera's stream in the Camera Preview: As a next step enter the authentication username and password for the external IP camera connection these parameters are obligatory only if the external IP camera requires authentication. Go to section Hardware / Camera > External Camera.Įnable the external camera and fill the correct RTSP Stream Address of the IP camera (parameters depends on the connected IP camera model). IP camera supporting RTSP streaming (you can find IP cameras that had been already tested on this page also with full specifications - Interoperability Manual).Before configuration please check if your device is capable of this feature in this manual section: Model Differences and Function Licensing.2N IP Intercom with firmware 2.5.0 or higher, but it is strongly recommended always to use the latest firmware.The external camera can be placed for example behind the front door as well as somewhere outside the building. Thanks to this feature you can see a second video stream from 2N IP Intercom. You can switch between the internal and external camera streams while using 2N® Mobile Video. The external camera is a feature enabling you to add an IP camera (that met the correct specifications - more here) to the 2N IP Intercom. You can add the external camera to your 2N IP intercom. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
December 2022
Categories |